Desiccants are Available in Beads and Crystals

The indicating type silica gel is almost same as the other except that it changes its color when it is fully contaminated and at that time it needs to be replaced. The best thing about silica gel is that once it is fully contaminated it is possible to reuse it again by heating them over 300oC.

As the silica gel beads are non-toxic it is possible to use them with consumable goods. But still it cannot be used loosely so, they are used in small breathing packets which allows to pass the air through it. There are various silica gel suppliers who sell the desiccant in bulk. But before purchasing any desiccant go through the details of the product. It should be approved by USFDA and passes the food and pharma grade. Only those desiccants passing tests under this category are non-toxic and are safe to use with consumable products. Silica gel is also used in breathers. The purpose of using these breathers is that usually in big factories sudden cooling and heating of machineries produces huge amount of moisture which needs to be absorbed. Many of the desiccants are used all on its own but some prefer to use it in combination with other desiccants like activated carbon or molecular sieves. Molecular sieves are known for absorbing odor. Using it in combination with other desiccant enhances the absorbing quality.

Read More

Silica Gel Desiccant for Moisture Drying

Silica gel is said to be the best desiccant when it comes at absorbing moisture. Removing moisture from unnecessary places is very necessary as even a drop of it can become a reason for big loss. Silica gel is also of two types indicating and non-indicating. White silica gel comes under the category of non-indicating category where blue and orange are the indicating ones. 

Silica gel desiccant is used in various industries to keep the products environment dry and moisture free pharmaceuticals, food, electronics, textile, stationery, agriculture, leather, air, gas and many more. Apart from controlling moisture it is also used for the removal of air, gas and water. Once the product starts to react with moisture, (specially the consumable goods) it starts to lose its originality and effectiveness. By protecting it against moisture it is possible to avoid spoilage and growth of fungi, mold, bacteria and other micro-organisms which inhibits in moisture condition. So, using silica gel can increase the shelf life of the products and keep them fresh for a long term.

Read More

Indicating Silica Gel Orange is Moisture Absorbing

There is another type of silica gel called the Self-indicating silica gel. It has a moisture sensitive additive impregnated to the plain silica gel. The indicator changes color as moisture is adsorbed thus giving a visual indication of activity level of the silica gel. There are many self-indicating silica gels available in the market, among which the orange self indicating silica gel is the common.

Orange to Dark Green Silica Gel Using an organic indicator this silica gel offers a very strong orange to dark green colour change. Orange to Colorless Iron salts is used as additive in this high capacity desiccant, changing from a deep orange to a very pale yellow colour. The indicator is very robust, making this silica gel well suited to repeated regeneration and reuse. Self-indicating orange silica gels are non-toxic just like other silica gels. Silica gel is in different industry for Breathers Transformers, Solvent Drying, Industrial Gases and Air drying Industries.

Read More

Silica Gel Orange Indicating Serves Various Uses

Packaged food is the most common type of food that we consume today. Due to the fast paced lifestyle that we follow, storing food has become the only option for us. Storing food can be difficult as there are many problems involved in storing eatables. One of the main problems is spoiling of the food articles due to moisture. The presence of moisture will promote the growth of fungus mold, mildew and bacteria on food items. In order to prevent this, some particular desiccants are used to suck up the moisture and create a dry atmosphere inside the packages. There are many types of desiccants available in the market, but one of the safest and commonly used desiccants is silica gel.

Silica gel is a hygroscopic and can absorb moisture up to 40% of its weight. It is an USFDA approved, non-toxic, DMF Free, organic desiccant. Silica gel is hard, irregular and in the shape of granules or beads. It has a high ability to desiccate. As it exhibits a lower vapor pressure than the surrounding air, water molecules adhere to the gels surface. Standard white silica gel is non-indicating as remains physically unchanged even when it adsorbs moisture. Non-indicating silica gel is cheap and effective, available in bulk packs sachets. Size of Beads is 2-5mm, 3-5mm and 4-8mm.

Read More

Silica Gel are Widely use in Pharmaceutical Industries

Some of the characteristic trains of this desiccant are that they are absolutely to use as they are USFDA Approved and are safe to use with food items, as are absolutely non-toxic. It makes the environment moisture free. These desiccants are DMF free and easily qualify all the food and pharmaceutical grade. There are many companies who silica gel sachets manufacture. Although, these sachets are available in many sizes but one standard size of these packets ranges from 1 gm. to 25 gm.

By absorbing moisture, these desiccants protects against many problems like fungus, bacteria, humidity and spoilage. Some of the desiccants not only protect against moisture but they also absorb odor. Many of the times these desiccants are used all on its own and sometimes in combination with other desiccants. These desiccants mostly come in granular or powdered or in capsule form. That is because in this form the surface area for absorption increases. You can find the use of silica gel pouches at mostly all small and big places.

Read More

Silica Gel Granular has High Absorption Capacity

Among all the silica gel granular, the best one which is considered by most of the industrialist is silica gel orange beads. In this type of silica gel molecules impregnated is naturally an organic indicator. Also this type of silica gel granular has high absorption capacity. It is said that it has the capacity to absorb moisture almost 40% of its weight. Once the granular are fully contaminated it turns from orange to light orange then light green and then finally dark green indicating that it is fully contaminated. It is available in various sizes ranging from 2-5mm, 3-5mm and 4-8mm. It is used for various purposes like drying and storage of flowers and seeds, optical instruments and other devices and drying of analytical samples and solvents. It is also the best replacement of blue silica material which was widely used in breather transformers. Apart from this it is the best solution to protect electronic and communication devices.

Read More

Silica Gel and Its Application as Silica Gel Orange, Breathers and Granular Explored!

Silica gel is basically a composition of silicon dioxide in amorphous form. So, it produces small and hard irregular beads or granular which look like crystals. It helps in absorbing moisture or odor. The absorption is possible because of the micro pores present in its structure. It not only absorbs the moisture but its interlocking feature locks them inside which results in change of shape and color of the granular. Moisture is easily absorbed in the granular because it possesses lower vacuum pressure than the surrounding air. Absorption stops when the level of pressure inside the granular as well as outside is equal. Silica gel is available in two types, one is indicating and the other is non-indicating. Under the indicating category comes orange and blue silica gel and white is the non-indicating type. By indicating silica gel it means that the granular changes its color after they fully saturates.

Read More

Structure of Silica Gel for Breather Transformer

Some of the unique features possessed by silica gel breather for transformers are that its body and cup is made up of unbreakable transparent polycarbonate plastic. Finishing of the body is done strongly with CRCA sheets which are joined with rubber gasket and stud to the body. It has special refining method and does not require continuous maintenance as there are less chances of air leakage. The only function of the breathers is to remove the moisture content completely from the air. It also helps to remove the dust particles. Silica gel breathers are hollow cylindrical tubes which are then filled with silica gel granules made up of pure silicone salt and if the granules are of indicating type it is mixed with cobalt indicator.

Read More

Access Long Term Absorption Free Environments with Silica Gel Breather Transformer

Undoubtedly silica gel is rated as the best desiccant. There are many factors which makes silica gel as more demanding. One of them is the reusability factor. As it cannot be used loosely, it is used in packets. The size of the packet depends on the requirement.  You must have seen small packets in the leather jackets, shoes etc. It is also used in shipping containers as the product most of the time comes in contact with moisture at the time of transportation. Silica gel is also used in breather transformers in factories. Breathers are said to be an efficient way of controlling moisture. In factories these transformers are used to control moisture obtained by big machineries. Moisture is generated because of sudden cooling and heating of machines. Silica gel for breather transformer is also classified into two categories - Clear view type silica gel breather transformer and aluminum body silica gel breather transformer.

Read More

Types of Silica Gel Desiccant Sachets, Packets and Bags

There is various type of air drying desiccants available in the market. The most popular and widely used desiccant is silica gel. It also comes in three variants that is orange, white and blue. Among the three orange and blue are termed as the color changing gel. This is because after absorbing moisture, the granules changes its color indicating that the desiccant granule is contaminated and needs to be replaced. Another reason which makes it more popular is that once it is fully contaminated it can be reused again by heating it over 300oC. The other type of desiccant is molecular sieves. Its properties are quite similar with that of silica gel. Advantage of using it over other desiccants is that its absorption speed is more and has more resistance against contamination.

Read More